Buy now on amazon Paint Stone Chip Repair Kit
Thanks to the QUIXX Paint Stone Chip Repair-Kit ugly chips and small spallings in the paint of your car-front will be gone in no time.
This product helps avoiding expensive repairs at car-paint shops and supports retention of value by a simple DIY solution.
Product details:
- Professional quality DIY stone chip repair
- Removes stone chips and damage to paintwork on bonnets, bumpers and much more.
- Suitable for most stone chips and damage on flat vehicle body surfaces
- Simple, fast application
- Developed and used by repair professionals
- Saves on costly repairs and helps retain value
- All-inclusive kit contains everything you need
- Contents: 2 sachets with mesh cloth soaked in special solution, 1 special rubber squeegee, 4 sandpapers 3,000, 1 sanding block, 1 tube special polish QUIXX Finish, 3 polishing cloths, 1 pair of gloves, 1 instruction manual
How to do!
The QUIXX Paint Stone Chip Repair Kit developed by paint professionals provides a quick and inexpensive remedy for problems with stone chips in the paint. Click through the pictures step by step and read the different steps.
1. Wash, dry and degrease vehicle part being repaired. Any wax and polish residues in scratches or stone chip dents must be removed with silicone remover or similar before touch-up.
Put on QUIXX gloves!
Check scratches or stone chips for rust and paint residue. If necessary, carefully sand or derust while WET using the enclosed sandpaper.
2. Now apply 1 to 2 drops of paint to damaged areas with the QUIXX paint brush, so that paint can be optimally distributed into damaged areas.
Leave paint to dry for 5–10 minutes.
(ambient temperature around 25 °C)
3. Then glide the enclosed QUIXX rubber squeegee over damaged areas while holding it at a slight angle and pressing it lightly onto the surface, so that squeegee removes excess paint and surface is smooth.
Wait at least 30 minutes.
4. Carefully wipe area with a damp cloth.
After minimum drying time of 24 hours, area can be re-polished across its surface using supplied polish if necessary (not a must).
How to do2!
Das von Lack-Profis entwickelte QUIXX Lack Steinschlag Reparatur Set schafft schnell und preiswert Abhilfe bei Problemen mit Steinschlägen im Lack.
Klicken Sie sich Schritt für Schritt durch die Bilder und lesen Sie die verschiedenen Arbeitsschritte durch.
1. Wash, dry and degrease vehicle part being repaired. Any wax and polish residues in scratches or stone chip dents must be removed with silicone remover or similar before touch-up.
Put on QUIXX gloves!
2. Now you can apply some of the QUIXX lacquer to the squeegee and pull it at a flat angle over the damaged areas, so that the squeegee distributes the lacquer to the damaged areas and it produces a smooth surface.
(ambient temperature around 25 °C)
3. Then glide the enclosed QUIXX rubber squeegee over damaged areas while holding it at a slight angle and pressing it lightly onto the surface, so that squeegee removes excess paint and surface is smooth.
Wait at least 30 minutes.
4. Carefully wipe area with a damp cloth.
After minimum drying time of 24 hours, area can be re-polished across its surface using supplied polish if necessary (not a must).
To the Amazon Shop